Today’s Global Cleaning Standard in Immersion & Ultrasonic Detergents
AquaVantage® 815GD-NF is the product of choice for aqueous cleaning processes including hot immersion mildly agitated tanks or ultrasonic cleaning processes and is great used manually for wipe or brush applications.
It provides an unbeatable cleaning ability achieving a water-break-free standard or higher laboratory level surface cleanliness testing.
It is safe on virtually all metals and composites, is non-corrosive and will not stain metals.
Its scientific formulation provides an unrivalled combination of cleanability, extremely broad material compatibility, extensive approvals and conformance.
Extremely recyclable and produced in an environmentally safe and biodegradable formulation.
SPECIFICATIONS AND DATA
AquaVantage® 815 GD-NF is the leading product of choice in immersion and ultrasonic cleaning applications and meets all the requirements for REACH compliance. This chemistry was originally developed for soil removal during the manufacturing or rebuilding of aerospace components in immersion, mildly agitated, or ultrasonic cleaning processes and is now widely used in all premium engineering precision cleaning applications throughout industry. This detergent can also be used very successfully for wipe or manual brush applications.
It provides an unbeatable cleaning ability achieving a water-break-free standard or higher laboratory level surface cleanliness testing.
It is safe on virtually all metals and composites, is non-corrosive and will not stain metals.
Its scientific formulation provides an unrivalled combination of cleanability, extremely broad material compatibility, extensive approvals and conformance.
Extremely recyclable and produced in an environmentally safe and biodegradable formulation.
SPECIFICATIONS AND DATA
- Recognised as the Global standard in Immersion and Ultrasonic tank cleaning detergents.
- A one-product parts cleaner for use with virtually all metals, including steels, aluminium and titanium.
- Mildly alkaline solution which cavitates in ultrasonics with unparalleled performance at all temperatures.
AquaVantage® 815 GD-NF is the leading product of choice in immersion and ultrasonic cleaning applications and meets all the requirements for REACH compliance. This chemistry was originally developed for soil removal during the manufacturing or rebuilding of aerospace components in immersion, mildly agitated, or ultrasonic cleaning processes and is now widely used in all premium engineering precision cleaning applications throughout industry. This detergent can also be used very successfully for wipe or manual brush applications.
AquaVantage® 815 GD-NF Cleaning Ranges
Always follow directions and information directly on the product label before use.
AquaVantage® 815 GD-NF Usage Directions
Always follow directions and information directly on the product label before use.
1. Add AquaVantage® 815 GD-NF to solution tank filled with hot or cold water using the dilution rate for your system.
2. Mix solution thoroughly.
3. Heat solution to specified temperature for your cleaning system.
4. Immerse parts in tank and soak until soil is removed.
5. Remove parts.
6. Rinse with water. Recommended conductivity of final rinse water:
AquaVantage® 815 GD-NF Storage & Disposal Recommendations
Always follow directions and information directly on the product label before use.
Storage
To prevent incorrect or unsafe storage of AquaVantage® 815 GD-NF, store away from incompatible materials. Do not allow to freeze.
Disposal
When disposing of AquaVantage® 815 GD-NF, dispose of waste and residues in accordance with local authority requirements. Please recycle container.
AquaVantage® 815 GD-NF Safety Precautions
Always follow directions and information directly on the product label before use.
Keep out of reach of children. AquaVantage® 815 GD-NF is for industrial or commercial use only. To prevent the misuse of AquaVantage® 815 GD-NF, use only in accordance with the following safety precautions.
AquaVantage® 815 GD-NF Material Compatibility
AquaVantage® 815 GD-NF is non-corrosive and non-staining to a wide variety of alloys. Some selected categories of materials compatible with AquaVantage® 815 GD-NF include:
AquaVantage® 815 GD-NF Soil Removal
AquaVantage® 815 GD-NF removes a wide range of organic and inorganic soils. Some categories of soils that can be removed with AquaVantage® 815 GD-NF include*:
AquaVantage® 815 GD-NF Approvals & Conformances
AquaVantage® 815 GD-NF Test Compliance
Always follow directions and information directly on the product label before use.
- System: Immersion & Ultrasonic Tanks. Also by hand as wipe or brush.
- Dilution Rate: 5-30%, typically used at 10%
- Temperature: 54-77ºC (130-170ºF), typically used at 60-66ºC (140-150ºF)
- Cleaning Duration: 1-30 minutes: typical parts are cleaned in 3-10 minutes
AquaVantage® 815 GD-NF Usage Directions
Always follow directions and information directly on the product label before use.
1. Add AquaVantage® 815 GD-NF to solution tank filled with hot or cold water using the dilution rate for your system.
2. Mix solution thoroughly.
3. Heat solution to specified temperature for your cleaning system.
4. Immerse parts in tank and soak until soil is removed.
5. Remove parts.
6. Rinse with water. Recommended conductivity of final rinse water:
- Ultra-Clean Applications: ≤ 50 microsiemens
- Precision Cleaning: ≤ 500 microsiemens
- Gross Cleaning: > 500 microsiemens
AquaVantage® 815 GD-NF Storage & Disposal Recommendations
Always follow directions and information directly on the product label before use.
Storage
To prevent incorrect or unsafe storage of AquaVantage® 815 GD-NF, store away from incompatible materials. Do not allow to freeze.
Disposal
When disposing of AquaVantage® 815 GD-NF, dispose of waste and residues in accordance with local authority requirements. Please recycle container.
AquaVantage® 815 GD-NF Safety Precautions
Always follow directions and information directly on the product label before use.
Keep out of reach of children. AquaVantage® 815 GD-NF is for industrial or commercial use only. To prevent the misuse of AquaVantage® 815 GD-NF, use only in accordance with the following safety precautions.
- Wear safety glasses with side shields (or goggles).
- Wash hands thoroughly after handling.
- Avoid release to the environment.
AquaVantage® 815 GD-NF Material Compatibility
AquaVantage® 815 GD-NF is non-corrosive and non-staining to a wide variety of alloys. Some selected categories of materials compatible with AquaVantage® 815 GD-NF include:
- Ferrous Metals: Carbon Steel • Stainless Steel • Steel
- Non-Ferrous Metals & Alloys: Aluminium • Cadmium Plating • Chrome Plating • Copper (Alloys & Plating)* • Hastelloy • Inconel • Monel • Ni-Cad Plating • Nickel, Nickel Alloys & Plating • Titanium & Titanium Alloys
- Plastics & Composites: Acrylics • Epoxy Resin • High Density Polyethylene/HDPE • Nitrile Butadiene Rubber • Polypropylene/PP • Polyvinyl Chloride/PVC
- Other: Glass • Painted Surfaces
AquaVantage® 815 GD-NF Soil Removal
AquaVantage® 815 GD-NF removes a wide range of organic and inorganic soils. Some categories of soils that can be removed with AquaVantage® 815 GD-NF include*:
- Buffing Compounds
- Carbon
- Coolants
- Dirt (Particulate)
- Fat
- Flux
- Grease
- Inks
- Oil (General, Cutting, Drawing Compounds, Forming, Honey, Hydrocarbon, Lubricants, Self-Emulsifying, Silicone/Greases, Sulphur/Chlorinated, Water-Soluble)
AquaVantage® 815 GD-NF Approvals & Conformances
- Airbus: AIPI 09-01-003 Cleaning with Aqueous Cleaning Agents
- Airbus: CML, 08AKB1
- BAE Systems: Process Specification R10-6024
- Boeing: BAC 5749; Alkaline Cleaning (PSD 6-153)
- Boeing: BAC 5763; Emulsion Cleaning (PSD 6-59)
- Boeing: HP 9-25; Degreasing
- Bombardier Aerospace: BAPS 180-040
- Bombardier Aerospace: BAPS 180-001 (Rev A)
- Bombardier (de Havilland): PPS 31.04, Issue 21, Aqueous Degreaser
- Meggitt Aircraft Braking Systems: fulfils Standard Practices Manual AP-842 (32-46-35) when used and maintained according to Brulin guidance
- Messier-Dowty: PCS-2621 (Pending)
- National Stock Number: 05 Size; 6850-01-606-8428
- National Stock Number: 55 Size; 6850-01-606-8434
- Rolls-Royce: OMAT 1/24S
- Safran: PR-1500
- Safran Aero Engines: DMP 13-300
- Safran Group: CMM 24-30-09
- SNECMA: DMP13-300 (Aluminium Alloys)
- UTC Aerospace Systems (Rohr): GSIL 2006-01
AquaVantage® 815 GD-NF Test Compliance
- ASTM F483: Total Immersion Corrosion
- ASTM F519: Hydrogen Embrittlement (Type 1c Bare)
- ASTM F945: Titanium Stress Corrosion (AMS 4916 & 4911 Alloys)
- ASTM F1110: Sandwich Corrosion
