Low Odour Solvent Degreaser Wipes

The Ultimate Degreasing Wipe for Precision Cleaning.
 
Brulin MP 1793 WIPES are industrial strength towelettes impregnated with 100% active, low odour, non-chlorinated solvent containing no ozone depleting compounds.
MP 1793 WIPES are manufactured to use as a safe solvent impregnated wipe replacing environmentally unsafe solvents.
These wipes exhibit excellent cleaning solvency are non-corrosive and leave no residues on cleaned surfaces.
They work effectively on a wide range of workshop soils including lubricants, greases and oils, inks, caulk, adhesives, tar and for cleaning electrical wire and components.
Use as a tack cloth, during metal preparation for finishing work or prior to  using adhesives for maximum adhesion.

​SPECIFICATIONS AND DATA

• Excellent solvency, containing no chlorinated solvents.
• Low odour and residue-free.
• Safe for use on most metals.
• High dielectric strength.

Brulin MP 1793 Wipes are a low-odour, ready-to-use, residue-free wipe solvent providing effective multi-purpose cleaning in an industrial-strength towelette.
Use for a wide variety of shop and surface soils including greases, lubricants, inks, caulking, some adhesives, and tar. Quick drying.
Brulin MP 1793 solvent is also available as a liquid without pre-packaged towelettes.

Directions
Brulin MP 1793 Wipes Usage Directions
Always follow directions and information directly on the product label before use.
Brulin MP 1793 Wipes are ready-to-use.

• Pull and tear wipe from dispenser.
• Wipe substrate until soil is removed.
• Turn, fold or change wipe as needed.

Storage & Disposal
Brulin MP 1793 Wipes Storage & Disposal Recommendations
Always follow directions and information directly on the product label before use.
Storage
To prevent incorrect or unsafe storage of Brulin MP 1793 Wipes, store in a well-ventilated place and keep container tightly closed.
Disposal
When disposing of Brulin MP 1793 Wipes, dispose of waste and residues in accordance with local authority requirements. Please recycle container.
​
Safety Precautions
Brulin MP 1793 Wipes Safety Precautions
Always follow directions and information directly on the product label before use.
Keep out of reach of children. Brulin MP 1793 Wipes are for industrial or commercial use only. To prevent the misuse of Brulin MP 1793 Wipes, use only in accordance with the following safety precautions.

• Keep away from heat/sparks/open flames/hot surfaces.
• No smoking.
• Avoid breathing mist or vapor.
• Do not use in areas without adequate ventilation.
• Wear safety glasses with side shields (or goggles).
• For prolonged or repeated skin contact use suitable protective gloves.

Material Compatibility
Brulin MP 1793 Wipes Material Compatibility
Brulin MP 1793 Wipes are non-corrosive and non-staining to a wide variety of substrates. Some selected categories of materials compatible with Brulin MP 1793 Wipes include*:

• Ferrous Metals: Carbon Steel • Stainless Steel
• Other Metals and Alloys: Aluminium • Brass • Cadmium Plating • Chrome Plating • Copper (Alloys & Plating) • Hastelloy • Inconel • Magnesium & Magnesium Alloys • Monel • Ni-Cad Plating • Nickel, Nickel Alloys & Plating • Tin • Titanium & Titanium Alloys • Zinc & Galvanized
• Other Surfaces: Concrete • Glass

* = Material compatibility should always be confirmed via testing with specific contaminants under specific cleaning conditions.

Soil Removal
Brulin MP 1793 Wipes Soil Removal
Brulin MP 1793 Wipes remove a wide range of organic and inorganic soils. Some categories of soils that can be removed with Brulin MP 1793 Wipes include*:

• Adhesives
• Caulks
• Dirt (Particulate)
• Fat
• Fluorinated greases
• Grease
• Oil (General, Cutting, Drawing Compounds, Fingerprints, Forming, Honey, Hydrocarbon, Lubricants, Self-Emulsifying, Silicone/Greases, Sulphur/Chlorinated)
• Smoke Residue
• Tar & Pitch
• Waxes

* = Cleaning performance should always be confirmed via testing with specific contaminants under specific cleaning conditions.
 
Industry Approvals, Conformances & Test Compliance
Brulin MP 1793 Wipes Approvals & Conformances

• Approved for use with Dow Corning Silicone Building Sealants per ASTM C794: Peel Adhesion Test
• Approved for use with GE Structural Adhesives per ASTM C794: Peel Adhesion Test
• Boeing: Number 84086
• Boeing (McDonnell Douglas): DPM 6380-1; MCS 6000, Type IB, Type IIIB, Type V, Type VI
• Hamilton Sundstrand
• National Stock Number: 6/100 Wipe Size; 6850-01-466-6157
• Sikorsky Aircraft (United Technologies): QPL SS9170/204 rev1

​Brulin MP 1793 Wipes Test Compliance

• ARP 1755B: Stock Loss Tests (Cat. 9)
• ASTM C794: Peel Adhesion Test
• ASTM D877: Dielectric Breakdown (to 30,000 volts)
• ASTM F519: Hydrogen Embrittlement (Type 1c)
• ASTM F945: Titanium Stress Corrosion (AMS 4911 Alloy)